Maintenance Video

Assembling and disassembling of splitting rod

1. Locate piston guide into the hole

2. Insert piston into the piston guide

3. Secure position by hammering

4. Saturate nut guide with oil

5. Tightly screw in nut guide with socket wrench

6. Finish assembly

7. Screw in the nut rings on the guides

8. Grip the splitting rods with a vice

9. Remove the nut ring and guide from the splitting rod

10. Gently shake the piston forwards and backwards

11. Grip the piston with a chain wrench

12. Insert an O-ring in piston groove

13. Insert seal after oil heating.